About Us   Contact Us   Ph: +91-79– 40086151-54   Email: info@shubhamindia.com

Our unique design of Side Stream Filter and cooling tower pond accessories ensures efficient & effective removal of suspended solids & other contaminations and reinforce healthy conditions of cooling tower and associated heat exchangers.

Shubham SSFs are available in diameters from 0.225 Mts. to 4.0 Mts.(vertically) and in length from 3.0 Mts. mm to 11 Mts. (Horizontally) with flow ratesup to 500M3/Hr. These rugged, pre-engineered, pre-assembled units minimize installation and start-up costs.

Working Principle

Water from the system is pumped through the top of the filter tank and distributed evenly over the media. Suspended particles are trapped in the filter media. The filtered water then passes through the media bed and reaches under drain assembly at the bottom of the filter and returns to the piping system.

Type of Installation

Direct piping connection: – Inlet and outlet of SSF are directly connected to main stream pipe and utilize main stream pumps for further filtration process which eliminates the requirement of extra pumps.

Cooling tower pond Connection: – This type of installation need additional pump which is directly connected to cooling tower pond at suction side and feed water into SSF for further filtration process and filtered water goes back to the cooling tower pond at the opposite of pump suction.This recirculates entire pond volume and does not depend on main stream pump and its operation.